Summer - rest time at the dacha. The full range of pleasure from country rest cannot be received, without having included such point as bath. Wooden, hot, pair, with aroma of birch firewood and broom, with tubs of hot water and cold douche from tub. And all this begins - with ignition of the furnace. How it is correct to kindle it?
It is required to you
- Birch firewood, spill or birch bark for ignition, paper for ignition, matches, mitten from dense fabric, water.
Instruction
1. At first examine design of the furnace and find oven latch. Still it is called sometimes work line rack. Recently oven designs do without this part, but on some seasonal dachas after all furnaces meet latch so far. The latch provides production of gases in pipe. And if you have found that - before kindling firewood remove it, at least on half. Define location of tank and fill it with water more than a half. Without water the furnace cannot be kindled at all! Examine bath outside on sweating room perimeter over soil level. Find and close ventilating ducts that the forced heat did not disappear. If there are no special stubs - usually use folded old things which can be pushed through to the canal so that after completion of soaring they could be taken out easily.
2. Prepare firewood, pin small spill, prepare paper (newspapers usually undertake) and find latch. You open latch and you put firewood in the furnace. The main thing at ignition of firewood is oxygen. Therefore firewood should not be put densely at each other. Put two polenets medium-sized cross crosswise or in parallel, between them place the crumpled newspaper, from above put spill, and press down several more medium-sized polenets who will densely not adjoin. Set fire to paper and you watch how cheerfully fire spreads on logs. Do not feel sorry for paper and spill, add them enough. You can in all gaps between logs report paper. But do not forget to leave the place for oxygen which has to sustain combustion. Below valve the drawer for ashes - ashpit can be located. Before ignition it is better to remove slightly it that the slot, small was formed. It will create air draft and will allow fire to capture firewood quicker. Having made sure that fire has inflamed - close valve densely that coal has not jumped out on covering of the waiting room or sweating room.
3. Go outside and make sure that from pipe there is smoke that means in pipe there are no blockages. Make sure that the furnace does not smoke in bath. When everything is rechecked - it is necessary to wait when water in tank becomes hotter, the sweating room will be warmed and to trouble broom in basin with hot water. Check periodically the furnace, add still firewood. In general the good furnace warms sweating room to standard for two loadings by firewood. That is as soon as the first consignment of firewood has begun to turn into coals - report the second party. When it burns down, as a rule, the good bath is ready. Pleskayete on stones in sweating room is a little waters, and heat the fact that it is necessary, it is possible to take a steam bath!