The garden and garden tool costs much, especially if it is qualitative. Care of it will help to receive the maximum return from your initial investments due to increase in duration of their use. Care for the tool obviously depends on its assignment. You clean it after each use.
It is required to you
- - brush with rigid bristle
- - metal bast
- - the denatured alcohol
- - grinding stone
- - abrasive paper
- - technical oil for lubricant
- - rags
- - soap
Instruction
1. Cleaning of the tool as which work in the earth (rake, shovel, chopper …) Clean tool head after each use. In case of need clean with rigid brush the remained earth and the dirt hammered in slots. Clean with metal bast rusty spots, oil the cleaned places technical. Wash tool head with water and wipe with fabric.
2. Cleaning of the tool for hairstyle (secateurs, garden knife, scissors …) After each use clean tool edge with the fabric, the wetted in alcohol for removal of juice or pitch of plants before they harden also dlyadezinfektion to avoid spread of disease. After that use soapsuds and carefully wipe with fabric. Regularly check condition of edges of the cutting tool and sharpen it if it is necessary. To make it, after cleaning disassemble the tool if it is possible (as the majority of secateurs). Establish edge in vice. To grind edge grinding stone that the chamfer angle was from within outside. You do not sharpen on the sharpening machine because it removes a lot of metal from edge. Collect the tool. Grease it slightly. Grease spring or axis of the tool with several drops of lube oil to facilitate their use and to reduce friction. Watch condition of spring and replace it if it has low tension.
3. Cleaning of handles instrumentaregulyarno check the place of fastening of the handle, tighten or adjust fixture if necessary. Grind wooden handles of your tools, using small abrasive paper. Rub them with the rag which is slightly moistened with linseed oil.
4. You contain tools in poryadkekhranita your tools in the closed and dry place. Hang up them, placing metal part up, it will allow to prevent accumulation of moisture and prevents rust formation. You store the cutting tool always with care, the cutting part to wall. Do not forget about safety, do not allow children to play with the tool.