With approach of cold weather it is worth thinking of trainings in house conditions. If you do not wish to fill up pockets of manufacturing firms of expensive sports equipment, you can make bars independently, the hands. The made product will be compact and convenient for house application.
It is required to you
- - 4 metal pipes 1.5 meters long;
- - 2 metal pipes 1.7 meters long;
- - metal corners 1 meter long on which there are openings for screws;
- - welding machine;
- - screws;
- - drill.
Instruction
1. It is necessary to establish self-made bars in house conditions on wall, and therefore it should be prepared at first. For this purpose apply the right corner to bottom so that one edge has appeared on floor, and another - on wall. Then note place pencil on wall for screws.
2. Apply the second corner at the height of 1.5 meters from floor so that its edges were located strictly over the first corner. Plan openings for screws below and above, drill them. Weld pipes 1.5 meters long on one of metal corners at the edges. After that weld on edges of another the remained two pipes on 1.5 meters.
3. It is necessary to weld pipes 1.7 meters long on the received design so that one of edges of corner was attached to wall, and on two others pipes 1.5 meters long were located. 1.7 meters weld one product on the left pipes which are fixed on corners, and another - to right.
4. Having made self-made bars, fix them on wall by means of screws. You can add the design soft hand-rail and back that you had opportunity to swing press and also not to rub callosity on palms. Now you know how it is possible to make bars in house conditions and can train without problems even in winter season.