A lot of things depend on what at bees will be the house. Both amount of honey, and quantity of bees after the wintering. Therefore it is necessary to approach production of beehives with all responsibility. We are responsible for those who were tamed.
It is required to you
- Wood of soft breed
- Milling machine (mill or power saw)
- Waterproof glue
- Nails
Instruction
1. Before cutting of parts in case of detection of knots of board it is necessary to otstrogat that rejection of parts after cutting has not turned out.
2. Then boards need to be dried well. The humidity of wood for beehives in accordance with GOST has to be no more than 15%, the high humidity of beehive increases the probability of diseases of bees.
3. After that assembly and pasting of parts is carried out. For more exact assembly it is necessary to find the scheme of type of the beehive chosen by you and to follow all sizes specified in it.
4. Then in parts by means of mill notches by diameter to the 23-30th are cut out top and lower. Edges notch need to be processed carefully.
5. After that parts of the body gather among themselves by means of glue and nails. Sometimes instead of glue thin strips of propolis are applied to consolidation of end joints. After collecting surely adjust parts that their connection was without distortions and slots.
6. After the beehive is built, it is processed drying oil from outer side and painted light paint. If beehives are not affected by atmospheric precipitation, then it is not recommended to paint them.