The cutting board is necessary for each hostess. Them even is necessary a little — it is desirable to cut fish, meat, vegetables, fruit on different boards. As a last resort, it is possible to combine vegetables and fruit. But for example, meat and sausage cannot be cut on one board as meat is exposed to heat treatment, and sausage does not. You should not use the first pieces of plywood or board as cutting board.
It is required to you
- - Overlaid plywood 8-10 mm thick
- - Fret saw;
- - Pencil;
- - Ruler;
- - Square;
- - Drill;
- - Drill;
- - Abrasive paper;
- - File.
Instruction
1. Saw off piece of plywood of the necessary size. The board can be any form. It can be normal rectangular board, but it is possible to make it and in the form of various figures. The most common form of cutting board — rectangle with the handle. Draw rectangle on piece of plywood. It halve the short party. From the received point postpone the pieces equal to half of width of the handle in both parties. Carry out through them perpendiculars to the party of board and postpone the pieces equal to length. Issue handle contours as it will be pleasant to you more — it can be oval, in the form of trapeze, with cloves.
2. Cut board the fret saw in the chosen form. Grind off corners file so that they have turned out roundish. If not to make it, the board very quickly will become inconvenient and ugly. Smooth out corners abrasive paper.
3. Smooth out nazhdachka all surfaces of cutting board to remove roughnesses. If to make processing insufficiently carefully, it is possible to put splinter. Besides, small pieces of tree can get to food.
4. If board with the handle, drill opening approximately in 2-3 centimeters from the end of the handle. It is necessary to suspend board on wall. Suspend rectangular board for corner, and in the figured board reminding in form, for example, animal or flower, the opening can be made in any place, but too is closer to edge.
5. If desired it is possible to decorate board. It is possible to draw or burn out pattern. On working surface you should not draw anything - the pattern all the same will disappear. Therefore decorate only that party on which you will not cut anything. Even if you do not want any drawings, it is better to mark boards somehow.
6. It is possible to rub board with wax. Then it will absorb less in itself not really pleasant substances. Heat board a little, rub it with paraffin, pounding it rigid linen rag. Remove excess of paraffin.