Choosing decorative fireplace for the house, it is the best of all to give preference to compact model which will not occupy a lot of space in the room. It is very good when the plate which is in the fireplace basis is slightly more – it will increase possibilities of dressing of fireplace. Mounting of decorative fireplace will depend on its design and functional features.
It is required to you
- Wide boards, fibreboard and plywood, screws, brown mordant, brush, wall-paper with the ridge invoice, chimney tiles.
Instruction
1. Assembly of front part of fireplace. The front part of fireplace consists of two frames which are connected among themselves. For a start it is necessary to put marking on the adjoining places of internal and external frames. After that on plain surface it is necessary to connect external frame to the help of screws. Then, on external frame front panels of internal frame keep within and are fixed by screws. Screws have to be small that when mounting, their tails were not visible on outer side of front frame.
2. Mounting of box. To collect box, it is necessary to fasten by means of screws it to back wall, previously having drilled openings under screws. Then the box needs to be attached front side to front part of fireplace. Having put all construction upside down, it is necessary to fix it by screws well. From within the box can be revetted with any material which is pleasant more.
3. Installation of the chimney shelf. Such shelf consists of three boards of different width: top – 30 cm, average - 26 cm, lower – 22 cm. For reliability it is better for regiment to fix by means of screws and two cross boards. Further it is necessary to paint the chimney shelf and external box brown mordant.
4. Mounting of flue. It is necessary to create trapezoid framework from wooden rails and to attach it to wall screws. Then the framework is closed by the plywood parts corresponding in form to the framework. Further plywood can be pasted over with white wall-paper with the ridge invoice.