To pick up good kitchen table, especially if the sizes of your kitchen are absolutely small, happens rather difficult. The folding table made with own hands taking into account your tastes and requirements, will be able to solve this problem. In the put state this model will look as decorative frame.
It is required to you
- — MDF plates;
- — glue for tree;
- — loops;
- — abrasive paper;
- — acrylic paint for tree;
- — aluminum pipe;
- — acrylic putty;
- — screws;
- — painting adhesive tape;
- — drill;
- — drill for tree with a diameter of 3 mm;
- — drill for metal with a diameter of 8-10 mm;
- — pencil;
- — ruler;
- — fret saw;
- — joiner's vice;
- — stopping knife;
- — paint roller;
- — brush;
- — dowels;
- — aluminum pipe;
- — screw-driver
Instruction
1. Choose the place for installation of folding kitchen table. Execute necessary measurements and make the drawing.
2. Design frame. For this purpose take plate of MDF of the suitable size and mark on it contours of four side levels.
3. Cut levels and record them on plate by means of joiner's vice. Take drill for tree and drill openings of 3 centimeters in depth on all perimeter. The recommended step of openings - 25-30 centimeters.
4. Establish metal drill. Deepen openings on 2-3 mm. Thanks to it hats of screws will not act over frame.
5. Accurately apply glue for tree on frame elements. Apply them into place and densely press to MDF plate by means of joiner's vice. Twirl screws in the openings made earlier.
6. Apply acrylic putty on hats of screws and feature connectors by means of the palette. Let's structure dry out within hour.
7. Accurately process frame surface abrasive paper. Paste over table-top faces with painting adhesive tape.
8. Paint table-top. It is recommended to paint over corners and the inner edges narrow brush, wide surface - paint roller. Let's paint dry out.
9. Fasten loops to edge edge of table-top, having arranged them at distance of 13-15 centimeters from edges. Apply frame to wall and note places of fastening through mounting holes in loops.
10. Drill openings in the places planned earlier and fix loops by means of dowels and screws.
11. Make basic leg of aluminum pipe. Length of leg has to correspond to height of fastening of table-top. If desired, it is possible to fix it by means of collar and special screws. Also as basic leg for your table it is possible to use small decorative table, suitable height.