For the house master who the hands wants to put in order and to decorate personal plot, having laid convenient for cleaning and circulation of path, it is important to make correctly form for casting of paving slabs. It is possible to get ready forms, but if you want something exclusive, make them.
It is required to you
- - scraps of bar or rail;
- - nails;
- - polyethylene;
- - burdock;
- - lubricating oil.
Instruction
1. Use for production of form for casting wooden rails or scraps of bar. Collect from them timbering. It can be triangular, rectangular or in the form of hundreds as it is pleasant to you more. Height of timbering do about 6 cm. Such thickness will turn out at ready tile.
2. Fasten bar among themselves by means of bolts just for decoration, screws or normal nails. From above, in timbering corners, it is possible to attach still rails that the form was stronger.
3. That process of casting of tile went quicker, make pieces ten timberings which need to be spread out on table. Previously lay thick polyethylene or veneer sheet on table. Its smooth surface will give you smooth outer surface of tiles.
4. It will be very convenient to you to work with form if at once you make it connector. That is in one corner of timbering the nail has to be pulled out or fix cap hook there. Then for removal from ready tile, it will be necessary to unclench form a little.
5. Make original tiles for garden paths in the form of leaf. They will have rather decorative character, but very much will decorate your garden. On the table laid by polyethylene put large leaves of burdock so that the reverse side with accurate crinkles streak was from above. The plant will also be form for casting.
6. Impose cement slurry on leaf and level the palette or trowel. Remove surplus of solution at the edges of leaf. When the tile dries up, invert it and remove leaf. For the following casting take fresh plant.