Use of polycarbonate in the construction sphere promptly gains steam. Quite simply it is also easily possible to build gazebo which will become decoration of country giving from it.
Before doing gazebo of polycarbonate, it is necessary for structural strength to carry out filling of the base. For this purpose at first it is worth being defined of what construction material the framework - bar, ordinary wood or profile steel pipe will be made. From wood the framework will be much easier, than steel. However the metal design is considered more reliable and strong.
Construction of framework structure
To build framework, it is necessary to establish the bearing support which connect horizontal levels from below and on top. The upper part of gazebo can be made different form - in the form of dome, valmovy roof, the normal double-pitch roof reminding rectangular shape.
Wooden bars about twelve centimeters wide and forty millimeters thick will be necessary for construction of rafter system. They need to be mounted through everyone half-meter for creation of good support for polycarbonate that important in the winter at roof covering thick snow layer.
Mounting of sheets of polycarbonate will become continuation of construction of gazebo.
Material of covering should be cut on the necessary sizes corresponding to framework dimensions. You should not forget that the small overhang allowing to take aside rain waters is necessary.
Closing of walls of gazebo with polycarbonate
For the equipment of walls it is necessary to follow the following rules of mounting. To monitor orientation of sheets – that is that their air channels were located down, then moisture will be able to leave spontaneously internal cavity of leaf. If the builder does not observe this requirement, after a while sheets of polycarbonate will dim from within as in the sun in them there will be development of seaweed and also other vegetation.
The top cut needs to be closed level, and lower to cover with the tape providing moisture drain.
For connection of elements of covering use special level. Fixture is carried out by means of self-tapping screws for metal or tree (depends on framework material). Application of the thermowashers promoting elimination of longitudinal expansion of polycarbonate as a result of temperature fluctuations is considered indispensable condition. For improvement of tightness of roof it is necessary to use the angular and connecting levels made of the same material. Using positive characteristics of polycarbonate and following all rules of installation, everyone can construct without extra charges gazebo for pleasant pastime.