Agree, without greenhouse, especially in our climatic zone, it is difficult to grow up good harvest. The greenhouse is special building which is created for the maintenance of plants and natural acceleration of their growth in comfortable warm conditions. Therefore if you want to have magnificent harvest and prefer to eat organic home-made vegetables, you need to take care of this construction and to begin process of construction of the greenhouse with framework.
It is required to you
- - cement,
- - crushed stone,
- - armature,
- - bar,
- - rail,
- - board,
- - metal pipes,
- - nails,
- - self-tapping screws, - glass, - fillet, - iron (slate),
- - door case,
- - door,
- - step-ladder,
- - ladder.
Instruction
1. In the course of preparatory work it is necessary to decide where the greenhouse will be placed. It is the best of all to place it in the depth of the site, approximately in 5-10 m from buildings and 2-3 m from different landings and fruit trees. It will be quite good if you orient it from the South on the North.
2. The area under the greenhouse it is necessary to prepare, remove carefully fertile layer by means of shovel and to carefully choose roots of plants, to take out soil. Along internal boards of future greenhouse bury slate or iron to protect the greenhouse from roots of weeds.
3. Now on all perimeter lay concrete foundation with armature (step of anchor of 50 cm, height of 1.5 m), fix horizontally two levels of armature by strong wire. Level tops of anchors across. In the course of underpouring leave exit of anchors to 5 cm that on them to fix framework.
4. The size of the greenhouse is chosen individually, but do not forget each 2 meters to establish columns for interior support which will support roof. For support use pipes 0.7 m long and with a diameter of 75 mm.
5. Foundation of the greenhouse from 4-meter boards, 50х100 mm, expose on anchors strictly across. Previously process all wooden products drying oil. In advance on all vertical racks mount plates corners, connecting them bolts then you fix them to the basis self-tapping screws.
6. Now it is possible to start installation of glasses. It is reasonable to work with pieces of 1.3 - 1.6 m (previously having separated them into 3 parts), basic size for mounting of 433 or 533 mm. If you are going to build the big greenhouse, then use glass sawn-off shotgun better. Attach glasses fillet and nails.
7. After that start installation of the central racks. Lift upward cross bars of the top tier and attach them to the central racks. Then in turn lift side bars and also fix them. Now in turn establish vertical racks, it is necessary to begin work from door and to circle. Do not forget to control constantly vertical by means of plumb.
8. For rigidity of design establish horizontal and inclined couplers from all directions and attach them screws. Now it is possible to put and fix door box.