Smoking sheds can be various form. The building at all the smoking shed approximately identical. In it there are regiments and hooks, above – pipe with extracts, and sideways – pipe for smoke exit. Everything works simply. It is possible to make such smoking shed and independently.
Instruction
1. It is the best of all to collect basis of the smoking shed from bar. It is necessary to bring down volume rectangle. Its height has to be about 2 meters, and the area - 1 square meter. From bar we collect basis for the smoking shed. We force down volume rectangle, 2 m in height and meter on meter in width. From three parties we sheathe board. Everything has to be beaten densely. It is the best of all to take floorboard. It has on the one hand groove, and about other key. We combine key and groove and we receive seamless wall. It is necessary to try to avoid emergence of slots. If they after all are, it is necessary to close up them tow.
2. After the framework is sheathed from three parties, we are engaged in production of door. We do board of boards by the aperture sizes. To board we fix the handle, loops and also latch for closing of door. To the body of the smoking shed it is necessary to beat loops also. After that it is possible to be engaged in attaching of door.
3. Sometimes there are cases when the door is leaky closed. It is necessary to beat from above on edge of door dense fabric. When closing door, fabric will nestle on door opening. Slots will disappear.
4. Further we will be engaged in roof. It has to be dual-slop. It is the best of all to do it of wood. Floor, as well as walls, it is necessary to hammer with board. It is also necessary to meet the main conditions - density and lack of slots. In roof it is necessary to make square wooden pipe. The pipe has to have latch surely. It is possible even to use normal oven latch. The latch can be made of tree. The simplest option – the piece of board attached on loops. It will serve in door role for smoke exit.
5. In conclusion it is necessary to make internal regiments. Between boards it is necessary to leave as much as possible slots. It is necessary in order that smoke freely passed through them. The gap has to be about 2-3 centimeters.