In one room there can be rather large number of various electric devices. Installation of the electrical outlet in the right place, provides the correct, safe and convenient connection to the power supply network of all devices.
It is required to you
- - perforator;
Instruction
1. Define the place for installation of the socket. If concrete wall with armature inside, then at opportunity, by means of the portable metal detector find the place without armature. If there is no metal detector, and more often and happens, then just make tag in the necessary place. If openings under sockets it is necessary to make a little, then take the portable metal detector in rental center of construction tools.
2. In the place where the switch will be installed, draw circle with a diameter of 65 mm on wall. As the center of circle use the made tag. By means of the perforator, drill with hard-alloy sealing with a diameter of 8 mm, on all length of circle drill openings. Then the same drill make openings in circle, the more the better.
3. Remove drill and insert chisel which goes complete with the tool into perforator clip. Switch off in the rotation mode. Using the perforator as pick hammer, cut down intervals between openings.
4. If there is crown for concrete drilling, then nakernit opening in the center of circle. Then you install the central drill of crown in nakernenny opening and you drill wall. If when drilling you get on armature, then short and heavy blows chop it. If it is not possible to cope with armature by means of crown, kill armature chisel and the hammer.
5. If necessary to make two openings under sockets row, between them cut down crossing point the chisel inserted into the perforator.
6. In brickwork, you do opening under sockets the same way.
7. In plasterboard walls do opening or special crown on gypsum cardboard, or cut out it construction knife.