How to make original vertical beds

How to make original vertical beds

Gardeners know how sometimes there is not enough place to put and grow up everything conceived. Help out vertical beds, and, it is possible to make them of waste material: the remains of boards, pipes PVC, tires and even from plastic bottles. The simple system of watering will help to reduce physical work, will only allow to irrigate and feed up occasionally plants. Such vertical devices are ideal to plant strawberry, wild strawberry, petunia.

It is required to you

  • - pipes PVC;
  • - boards;
  • - bars;
  • - self-tapping screws;
  • - plastic bottles;
  • - strong refuse sacks;
  • - fertile soil;
  • - seedling of petunia, strawberry, wild strawberry;
  • - drill and nozzle on it;
  • - scissors.

Instruction

1. It is possible to make vertical beds practically of nothing. Wide pipes PVC in which openings are made will be put to use. If you have big plastic bags, put them in pairs, scissor windows. It will be necessary to suspend designs on vertical support, to fill here soil, to plant wild strawberry.

2. Paint old barrel, fill it with fertile soil, make dredging on all surface, using drill, nozzle on drill or scissors on metal. Put strawberry mustache in these openings and on top. Connect two sheets of slate wooden levels, by means of screws attach to them legs from bars, and here one more vertical bed is ready. Put boxes of different size one on another, since big, finishing small, such design will also allow to save a lot of place.

3. Solve problem of vertical gardening, using old ladder where attach plastic or wooden boxes. Rims and tires will also become way out for those who want to grow up strawberry, to process it, almost without bending down and to have beautiful beds.

4. Wonderfully vertical beds for strawberry from tree look. For the device such it is necessary to put at first four bars or 4 thick boards in the form of cone, on the center ― still same. From above they fasten by means of corners and self-tapping screws. About the basis beat 4 boards to make framework strong. With certain step, from below up, it is necessary to fix some more boards to build bed bed.

5. It is absolutely simple to develop original design of the garden site, having collected by the hands the following design. Stages of its creation are visible on photo. At first into the earth hammer armature rods, then from above on them put pipes with the openings which are previously drilled in them.

6. For the device of system of watering in similar designs in the center of vertical bed from PVC, wooden or another establish pipe with a diameter of 10-15 cm in which drill openings. From above the funnel is put, water manually is filled in or the vertical pipe is attached, the hose joins it, and the problem of watering and liquid fertilizing is solved.

7. The following design is suitable not only for cultivation of strawberry and flowers, but also greens. Cut off top of plastic bottles on third, fill fertile soil here, by means of wire fix on pyramidal wood structure. But such bed should be watered often. Therefore it is better to cut off bottom and neck at each bottle, to put one in another vertically, to make bed on basis of design of pipe PVC. Vertical bed from PVC or plastic bottles ― the ideal decision and for cultivation of greens, berries on the balcony.

8. Here what can be design of the garden site. It strikes with the beauty, singularity, helps to save a lot of place, facilitates care for strawberry, flowers, greens.

Author: «MirrorInfo» Dream Team


Print