At all times buildings put from tree. To construct, woodworking machines are necessary. For the personal building and for conducting small business it is possible to make tape power-saw bench. For extensive business the machines are required industrial production.
1. Basis for power-saw bench make rails of corner and direct them up.
2. For guides take semi-inch pipe and pipe which on it will put on.
3. As cross ties weld on profile pipe semi-inch, with welded on it by fixture for deduction of log. They have to move freely, and at tree clip, be got jammed by sledge hammer.
4. Make profile pipes speakers for rails, on ledges place adjusting bolts. On them install bridges for laying of logs.
5. Buy suitable pulleys and record on semi-inch pipe. It is possible to establish them under small inclination, then the tape will not fly.
6. Rollers and bearings get red-hot. Arrange them on shaft.
7. Insert shaft into tube and weld on semi-inch pipe on which the pipe with large diameter is dressed. Weld with the displaced axis.
8. Weld frame from channel and strengthen angular channel.
9. For strong installation of the cutting part attach bolts.
10. For raising of logs use the winch.