If the main framework of cabinet is already ready, then regiments is the simplest element from all its possible parts. It is necessary to observe only a two-three of the moments at their production, and the cabinet will serve you for many years.
It is required to you
- drill, self-tapping screws, shuropovert, boards.
Instruction
1. Tools. In advance think of tools. It will be necessary for you drill and shuropovert. Besides it is worth acquiring the edging film which will help you to finish beautifully just made shelves. Pay attention to width and length of tape upon purchase and also to color. It should not be already or shorter than the shelf and has to have pleasant color for your eye.
2. Views of shelves. There are several convenient options: establish shelves or on corners (easiest way), or on couplers (strongest way), or make them removable that at any time they could be withdrawn from cabinet without the forced its damages and excess movements.
3. Perhaps, the most difficult view of shelves are so-called "mezzanines" which are located above over bars and hooks for clothes. They first, most often long and, most likely, will cave in over time under weight of loading. Therefore strengthen design by means of bracket. It undertakes the main loading from middle part and besides does not spoil presentation at all.
4. Fastening elements. As fastening elements without which it is impossible to make regiments use self-tapping screws. They have the system of optimum requirements: they should not be a little (for design of the average size - at least 12 pieces). Length of self-tapping screws has to be twice more, than board thickness. Some, by the way, still in the old manner use nails, but practice shows that it is much more convenient to use self-tapping screws and is more practical.