Furniture is integral part of each house. However quite often it is necessary to refuse, for example, big cabinet as there is not enough place. And here then comes to establish thought there sliding wardrobe which is more compact? than traditional.
Instruction
1. Before making sliding wardrobe, it is necessary to foreknow what sliding mechanism will be used at its production. The order of your actions also depends on it: Buy the mechanism for sliding doors. It can be done in the furniture market or in shop of furniture fittings. There are two main types of mechanisms: on rollers and suspended, but the principles of their installation are similar.
2. Make calculation of parts of cabinet taking into account necessary allowance for the acquired mechanism. If doors are outside of the cabinet body, then do not forget to make cover and bottom wider, than regiments, on them it will be necessary to fix the directing profiles for the mechanism. It is the best of all to make the drawing of cabinet, then you will not forget purpose of parts at production.
3. Go to the furniture shop in which to you will cut material by your sizes as manually to make it quite difficult and the quality will be lower. As material, the laminated chipboard is more preferable to get.
4. Having bought necessary parts of cabinet, accessories and screws, to make sliding wardrobe will be already only trick. You will need to paste over all edges of parts which will be visible with special milominovy edge with adhesive layer. Having put the iron on average power, and carrying out by it along the edge attached to part face it will not be difficult to make it. Further it is necessary to cut normal stationery knife protruding edges of edge, then it is possible to process manually them small abrasive paper, preferably No. 150 or No. 180, in order to avoid damage of edge during operation.
5. Having prepared all parts, connect them according to your drawing, having assembled the cabinet body, and at the same time, without forgetting to establish necessary accessories and fastenings of shelves. It is more convenient to establish some parts of accessories even prior to assembly of cabinet.
6. Having fixed the directing mechanism profiles on the body, having established cabinet exactly by means of level, it is possible to start installation of doors. The mechanism needs to be adjusted so that doors moved rather freely, but at the same time reliably kept on the places. Correctly made sliding wardrobe, will serve to you long service.