The notebook – the mobile computer. But nevertheless owners of these devices face problem that imposingly it is almost impossible to be located on sofa with the notebook. Flow back, hands and neck and the computer it is heated so that it can burn or be disconnected. It is easy to solve this problem, having made table for the notebook independently.
Table of rigid construction
Rigid construction of table – one of protozoa. To make such table, it is not necessary to spend money if there are parts of old furniture. The table of rigid construction consists of only three parts – table-top and side parts which perform function of legs.
The size of table-top is chosen by the size of your notebook. For the most widespread models of portable computers with the diagonal of the screen of 15.6 inches there is enough table-top of 27х60 cm.
Side panels have the form of rectangular trapeze with sizes of 27х20, 5х25, 5х28 cm. The slanted party of trapeze 27 cm long fastens to the respective region of table-top screws. Height of back part of table will be 28 cm, and lobby height – 20.5 cm. For more reliable fastening of side parts from the inside fasten it to table-top corners. Such table will be convenient for work behind the notebook in situation "reclining". The table is put over legs, and the mousepad can be put near itself. If to make the size of table-top it is more, then rug it is possible to arrange also near the notebook.
Table of light-weight construction
The table of light-weight construction, as well as the previous model, is not transformed, but nevertheless it is simpler to make it. The table-top is made of MDF, plywood or other similar material of 60х28х1.6 cm in size. For legs the pipe PVC, polyethylene or chromeplated 132 cm long and with a diameter of 2.5 cm is used. Fastening will require corners of PVC of the same size, as well as pipe. On two corners by 90 and 135 degrees. The pipe should be cut on 6 identical pieces. On corners of table-top it is necessary to record collars that tubes and corners had not to be pasted to it. On front part corners by 135 degrees fasten, and on back part - by 90 degrees. But the table all the same will be inclined in spite of the fact that all tube sections of identical length. Besides, at such fastening the table can be sorted at any time.
Table for the notebook from natural wood
Admirers of what style can make table of natural wood. For its creation it is necessary to stock up with natural wood with boughs. Parts of table should be fastened by means of joiner's glue or self-tapping screws. That the table of bulls is convenient and steady, it is necessary to take parts of one sawn trunk. Legs – not sawn off boughs which are adjusted longwise. Sideways and behind too it is not necessary to delete boughs as they will be useful for placement of various hardware which is necessary during the work from computers – flash cards, earphones, wires. The tree needs to be ground properly, but not to subject to chemical impregnations. So the quality and natural type of natural wood will remain.