If you like to sew, the problem of search and release of table for drawing up patterns, raskraivaniye of fabric and the process of sewing is familiar to you. Threads, needles, bobbins, claws and other accessories lie in different places and it is necessary to collect every time everything on table, and after work to put back. That process of sewing became pleasant and easy, it is necessary to make table for the sewing machine.
It is required to you
- - sheet of paper;
- - pencil;
- - material: Chipboard, laminated chipboard, plywood, etc.;
- - hacksaw or electrofret saw;
- - bar;
- - abrasive paper;
- - varnish;
- - mordant;
- - roller;
- - edging tape;
- - iron or construction hair dryer;
- - hinges;
- - accessories for boxes;
- - self-tapping screws and pins with countersunk head;
- - screw-driver or screw driver.
Instruction
1. Make the project of table for the sewing machine. Draw table-top and walls, or legs on the sheet of paper, specify the desirable height, width and length of table. If the place in the apartment is limited, can make folding option, for this purpose separate table-top into two parts, one of which will be permanently (for the sewing machine), and another on hinges with additional leg or support (for patterns and raskraivaniye). Surely provide several boxes for different trifles.
2. Pick up material for table, it can be thick plywood, chipboard, laminated chipboard, furniture board or other rather thick materials. Outline the sizes and form of table-top, bottom and sidewalls on surface (in different ways several times check corners – they have to be strictly direct). Cut the required form by means of hacksaw or the electrofret saw.
3. If you prefer table with legs, cut them from bar. The normal table requires 4 legs, for folding you need 5 or 6 legs of identical length.
4. Process materials, bringing them into accurate beautiful view. If necessary to oshkurta also grind legs, progruntuyta surface. Cover with mordant of right color, then varnish. Paste over edges of parts from chipboard and laminated chipboard with edging tape, its heating by means of the construction hair dryer or the iron.
5. Collect table. At first collect basis – sidewalls and table-top, connect them by means of pins to countersunk head 30-35 mm long or self-tapping screws, in addition coating all joints with glue. Then collect parts on hinges, fasten them by means of self-tapping screws.
6. Separately make boxes, fix accessories: roller guides and handles. Check whether well they enter the space intended for them.
7. In order that it was possible to remove the sewing machine, in table provide shelf. Then the table will be easily transformed to convenient curbstone.