Simply and cheap it is possible to equip work table in the small room, using surface under window. The windowsill is well lit, and the view of the street will help to relax the eyes tired with work. The table can be stationary, with the shelves located under it, or folding, with the folding or unscrewed legs.
It is required to you
- table from windowsill:
- - sheet MDF;
- - tape measure;
- - pencil and ruler;
- - electrofret saw;
- - drill with thick drill;
- - abrasive paper;
- - liquid nails;
- - screws and screw driver;
- - ready metal legs for table.
- The developing table:
- - joiner's plate;
- - continuous loops;
- - bar;
- - screws and screw driver;
- - electrofret saw;
- - varnish and roller;
- - abrasive paper;
- - tape measure.
Instruction
1. Table from windowsill. Measure thickness on which it is possible to increase your old windowsill. Shutters of window have to open and not concern new surface freely. Taking into account this size buy the sheet MDF or chipboard. Try that color of new panels approached your interior.
2. Postpone windowsill width on future table-top. Think and measure for what distance the new table will be given from window. To you it has to be comfortable to sit at it, having put elbows on surface, otherwise hands will be quickly tired. If under window battery heating is located, then knees should not rest against it. The front part of table can go parallel to window or to be arc-shaped.
3. Cut the drawn preparation from the panel. Try on it on windowsill. Mark with pencil on table surface where it is necessary to make openings for circulation of hot air from the battery. If the table from windowsill turns out long, then two legs will be necessary for you for table. For short windowsill it is possible to use one, having arranged it on the center.
4. Make equal openings for hot air on all width of table thick drill. Process them abrasive paper that there were no agnails. Screw metal legs on table-top.
5. Strengthen table-top on old windowsill liquid nails. Level surface, if necessary enclose thin plate between the planes. Adjust adjustable legs on height. The table is ready.
6. The developing table. Attach to your equal strong windowsill from below of the necessary size continuous loop. Length of table will be equal in this option to windowsill length.
7. Cut table cover. Make in it two-three rows of the openings which are carrying out hot air from the battery. Make two legs and cross-piece of bar. Process everything abrasive paper and varnish. Connect screws the cut elements.
8. Attach legs with side bar continuous loop to table-top. Then connect cover to windowsill. In the put state the table closes the battery and decorates the room. Color of surface of table has to be in harmony with situation in the room.