If your notebook strongly heats up and burns knees, fingers and table, then it is necessary to fight against it quickly. Not much know that the cooling support can be created also the hands. On it not enough time will leave.
It is required to you
- - old DVD player;
- - 4 coolers;
- - screw-driver;
- - pricker;
- - two white svetoid.
Instruction
1. Take all superfluous from your player, having left only one body (more precisely, its cover). From above the surface has to be clean therefore it is necessary to remove any stickers which are available here. For this purpose heat surface the hair dryer and pull smoothly for edge of sticker. On surface there can be glue. Remove it by means of acetone or liquid for varnish removal.
2. Make marking of holes on cover under coolers. Prepare 4 cooling coolers, they can be taken from the old system unit of the computer or to get cheap in the nearest commission shop. Previously put your notebook on cover and take it in the working condition of 15 minutes. It will help to define the heating most up zones.
3. Take drill, pick up suitable drills, begin to drill openings for fastening of coolers. Further be engaged in openings under their blades. Smooth out body inside from roughnesses by means of set of small files.
4. Put decorative illumination in the body. For this purpose two white LEDs which can be withdrawn, for example, from the old DVD player used for support will be necessary for you. Heat pricker on gas and make necessary quantity of openings in the body.
5. Establish coolers, connect contacts and place ready design on table. Give tension and test work of your support.