To make the door opening up only the real handyman independently will be able, however now it is not required as it is much simpler to buy ready door and just to mount it to the right place. Most often doors with the mechanism of opening are upward used in garage or utility rooms where it is necessary to save as much as possible space, besides the similar door of the smaller size can be mounted even in the house.
Instruction
1. The main condition – availability of sufficient space indoors to establish all guides and springs which are located in upper part of door opening. Designs of door are the cornerstone horizontal sections. Connect them among themselves loops so that the door cloth had relative plasticity.
2. At the edges of design arrange the brackets attached to rollers which in turn can move on the guides attached to room ceiling.
3. Attach torsion springs and ropes to drum. The mechanism is set in motion with their help. It is possible to use the remote controller.
4. To make door on the present waterproof, in addition isolate it on perimeter plastic or rubber gaskets.
5. Mounting of door is in that accurately following the instruction, to collect design and to fix it indoors, at the same time it is important to remember that all parts have to be well connected and densely fixed.
6. Establish frame of door absolutely exactly, using level.
7. Fix brackets and rollers and only then lay sections.
8. When the cloth is collected, establish and fix horizontal guides then mount torsion spring and check horizontal position of shaft.
9. Pay special attention to control of spring, having tightened it to required position, check balance and adjust balancing of door. In spite of the fact that mounting requires attention and painstaking, has put these not especially labor-consuming, and 2 persons without certain skills will be able to establish door in day.