The fitted cupboard is fine decision for small apartments. It will save space and at the same time will order storage of the most various things. The fitted cupboards or sliding wardrobes can be ordered in dimensions and modifications necessary to you today. But if there is desire, nobody prevents to make the fitted cupboard with own hand.
It is required to you
- Gypsum cardboard, sliding doors, guides, tools, accessories, levels, self-tapping screws, paint, nails, tape measure, pencil, sheet of paper.
Instruction
1. Before making the fitted cupboard, it is necessary to provide what it will be. For this purpose look through the corresponding magazines, be gathered the suitable ideas. Now it is possible to start drawing up own project. Carefully measure all sizes of that place where the cabinet will be located. Then draw the drawing on the sheet of paper, having noted on it all sizes. Depth of the fitted cupboard has to be not less than 70 cm. If you are going to mount luminous source in sliding wardrobe, note the expected place pencil on wall.
2. Then note directly on wall where two sidewalls of your sliding wardrobe will be located. It is possible to start mounting. Sidewalls can be made of two or four levels in several ways. For example, it is possible to build at first frameworks of sidewalls of the fitted cupboard on floor, and then to attach to wall. But it is possible and to beat boards for cabinet sidewalls to wall at once. Then note the place where will be there is center of cabinet. It is better to check marking plumb. That the design was more reliable, attach it in addition nails to floor and ceiling. Then make door framework of two or four rails. Further cut off gypsum cardboard to the necessary sizes and attach ready sheets to sliding wardrobe sidewalls. Do not forget to take out outside of wire - contacts of source of current if in cabinet there is bulb.
3. Now close up all seams before painting of cabinet. Fix from above and from below door opening guides, bring to them doors. Establish clothes bar, then separate sections on height into 2 - 4 parts. Establish regiments necessary to you. Trim cabinet with necessary accessories, attach frameworks for drawers, install electrical equipment. Paint cabinet. When paint dries, can use it.