Practically each person can manufacture the listogibochny machine. Process does not take a lot of time and forces. Also exact arrangement of all parts is not required. The listogib requires metal, hinges and loops. Not to do without welding machine in any way.
Instruction
1. For a start be engaged in preparation of everything that is necessary for production of the high-quality listogibochny machine. For this purpose it is necessary to get channel stick, pipe and corner. All these elements are necessary for production of framework. Also the pipe on handles and several corners is required. With their help it will be necessary to make clamping and rotary beam. First of all pay attention to flatness of all parts. Curve and twisted metal will not approach. The quality of assembly of listogib will fully depend on parts. Except the main parts, get strong loops and hinges, bolts and nuts and the allyuminivy rule. It will use as clip.
2. Be engaged in assembly of framework for listogib. For this purpose saw channel and big corner several centimeters bigger, than length governed. Pick up two pieces of strong pipe. With their help the connection of channel and corner is carried out. Put channel on side internal part to yourself. On edges of channel establish pipes and weld them. Over pipes weld corner. It is necessary to do it so that the vertical party was located the plane to us. It is necessary to Napilivat and expose all elements very precisely. Otherwise the design will be uneven.
3. Further be engaged in clamping beam. It needs to be hung up. Establish nose of the rule exactly on terminal edge of channel. Press the planes of the rule and channel and record. Further be engaged in installation in loop. They has to adjoin to clamping beam and to back corner of framework. Weld loops and check them for working capacity.
4. After that it is necessary to make clip. Saw off corner of the same length, as well as clamping beam. Weld loops on it. Loops have to be welded on edge of corner of framework on the vertical party. The corner of clip has to rotate on 150? 160 degrees. On corner install one part of hinges. Establish other part on clamping beam.