The minitractor is reliable and almost irreplaceable assistant when carrying out agricultural works on personal plot. But the price of such equipment is rather high. If you have conceived to make the minitractor with own hands. Besides special knowledge and skills, you will need to get the main knots of transmission and the power unit. However, it is possible to try to use old knots from the written-off equipment.
It is required to you
- - drafts of gear shift;
- - engine;
- - gearbox;
- - rudder control from the car;
- - back bridge;
- - gearbox;
- - wheels.
Instruction
1. Make frame to minitraktoraram of the minitractor it is possible to make of corner, channel or tube sections. Length of frame pays off, proceeding from the desirable sizes of the minitractor. When calculating it is necessary to consider the sizes of the power unit and driver's seat. Weld longerons on front top face of plate of reducer. Strengthen this connection by kerchiefs in the vertical and horizontal planes. At the same time it is necessary to observe parallelism of the main power elements. Make and weld frame of the power unit.
2. Attach back wheels to reducers and establish front part of frame of the minitractor on supports so that longerons were parallel to earth surface. Calculate height of sleeves of basic turning gear of front wheels of the minitractor. Weld cross-piece and channel on longerons. Drill opening under trunnion in channel sidewalls strictly in the middle.
3. Make front you mostvytochit basic turning gear parts. Mount knots of basic turning gear with front wheels. Cut two metal pieces and weld them since one end on the sleeve of knot of swing, and with another - on the sleeve of the oporono-swivel block.
4. Bring the front bridge under minitractor frame. Combine openings in sidewalls of channel of frame and the sleeve of swing. Insert trunnion and wrap nut.
5. Arrange reducer of the main gear in the body of the back bridge. Install gum sleeves. Record sitting. Make oil tank of pipe and install it under sitting. Cut wings of back wheels. Establish angular reducer on the lower branch of chain. The fuel tank of the minitractor is made of stainless steel.