Giving — first of all the place for family holiday. Therefore it is necessary that there it was good and convenient to all. Country swing will help to borrow children, on them also adults can have a rest if swing is made on conscience and of strong materials.
It is required to you
- Bar of 50х100 or 100х100 mm
- Metal corners
- Self-tapping screws
- Screw driver
- Plywood or rails for bench
- Bars for back
- Rope or metal chain for the suspender
- 2 hooks
- For rope special clips are necessary
- Bitumen
Instruction
1. Calculate the bench sizes. By them calculate the sizes of the lower frame of support. It has to be 50 cm wider than sitting. Define also whether you will drive swing or you will just put them on the earth. In the latter case process bars for the lower frame bitumen.
2. Saw off bars on given sizes. At you 9 pieces have to turn out. 4 bars will be necessary for the lower frame of the basis. As the lower frame represents rectangle, bars can be two sizes. 4 identical bars will be required to you for side columns and 1 - for cross crossbeam, its length is equal to length of the lower frame. Collect the lower frame of support, having fastened bars with metal corners.
3. Calculate height of columns. On each side at you 2 triangles have to turn out. Side edges of the lower frame form their bases, and tops will need to be connected crossbeam. The design has to turn out symmetric.
4. Collect from bars frame for sitting and back of bench. Fill on them rails. Connect back and sitting. It is better to make it at an obtuse angle, 120-135 °. For the teeter the bench can be fastened and at right angle.
5. On the top crossbeam fasten hooks. Fix chain. Adjust height. The adult has to reach the earth toes.
6. Swing can be made even more comfortable if to fix tent over the top crossbeam. However, it depends on where you will put them. Choose the most convenient location.