To heat garage by means of electric heaters - business ungrateful. Electricity bills increase, and becomes warmer not. The forgotten furnace potbelly stove model can come to the rescue old and unfairly. It is simply irreplaceable where there are no other sources of heating.
It is required to you
- - old dairy can on 40 l;
- - chisel;
- - branch pipe with vane;
- - steel wire;
- - steel pipes;
- - welding machine;
- - steel strip 2 cm thick;
- - felt.
Instruction
1. Take can and cut through slot slightly below than his mouth. This slot is necessary for ashpit. It is possible to cut through it by means of chisel.
2. Cut in the can bottom opening for branch pipe.
3. Make serpentine you kolosnikvozmit steel wire with a diameter of 6 mm. Bend it and push in future potbelly stove through mouth. Stretch wire to the necessary sizes.
4. Take steel semi-inch pipes and bend them according to diameter of can. Equip the potbelly stove with rings support on each side. Straighten the ends of pipes for receiving legs of the potbelly stove.
5. Fix rings support by means of the fixer made of steel plate.
6. Make prefurnace listdlya prevention of ignition of floor in front of the potbelly stove it is necessary to attach prefurnace leaf. Take the sheet of roofing steel and cut out from it preparation of 500х700 mm. Paint preparation by oil paint from two parties and well dry. Make clay mortar. Take felt, impregnate it with solution and well dry. Lay felt under toplivnik of the furnace. Put on it steel preparation. Attach to floor by means of nails or screws. The furnace potbelly stove for your garage is ready.