If you have giving standing on the coast of the lake, pond or the small river it considerably facilitates question of watering of your kitchen garden. But daily it is not really convenient to go with buckets to the river. Make to yourself the heat or wave pump, and water will come to your kitchen garden.
Instruction
1. At first we will talk about the heat pump and about how it can be made. In it there are no rotating and moving parts. Such pump from atmospheric pressure works. Let's make such pump. We install big metal barrel on support tripod. At barrel bottom we need to seal the crane so that at filling in in barrel of 1.5 l or less water from the crane did not flow.
2. On one side at barrel we need to drill opening of 30 - 40 mm in the diameter. We weld on this opening the corresponding diameter the union which we put on hose from strong and dense rubber. Now it is necessary to put on the filter which will fall then to superficial well or reservoir other end of hose. The tightness of all connections of the pump is obligatory.
3. Now how the heat pump will work. We pour in barrel at the closed drain cock 1.5 l of water. Under barrel we make fire. During boiling of water steam which will force out air from barrel through hose will go. And the hose has to be the end in water at this time. When air bubbles cease to leave hose, we extinguish fire. Steam will quickly be condensed in barrel and pressure will fall. The water pushed there by atmospheric pressure will begin to come to our barrel. Only 20 minutes of expectation – and waters in flank will be gathered about 120 liters.
4. Wave pump. Let's hammer into reservoir bottom four pegs and we will establish log. Let's achieve that pegs were directly in its zapila. Let's establish cross bars which will limit movements of our log down and up. Otherwise the log will be washed away by the first serious wave. Let's arrange on boards the pump (the small mechanical pump can be bought in any shop of the equipment). The system of rods of our pump will allow log to rotate a little around longitudinal axle.
5. The wave which will run on our design will lift log and to transfer through rods of the movement directly to the pump piston. In the pump water will be forced. The leaving wave will lower log, and the pump will suck in water.
6. Logs can be taken fir-tree. 50 – 80 kg will be optimum weight for log. Let's impregnate it time on 3 – 4 heated mix from natural drying oil and kerosene in equal proportions. We do not forget to impregnate Zapila on log too. That's it.