Regardless of what owners prefers to grow up at the dacha or personal plot – fruit, vegetables, flowers or lawn grass everything needs competent and timely watering. The easiest way to organize delivery of water to each plant, it is mounting of automatic watering.
Instruction
1. Draw the sketch of system of watering. Measure and consider length of necessary vinyl hoses diameter ¾ inch. Length of hoses depends on length of the watered surface and the number of lines of watering.
2. In the plastic capacity of 100 - 200 l. (depending on the watered area) with the twisting wide cover, turn off cover and drill in it the quantity of openings corresponding to the number of irrigation lines.
3. Insert the union with the dragging-on nuts and laying into the drilled openings. Between laying and cover put small layer of sealant to avoid water course. Install the crane which regulates water supply on the watered surface on each draining.
4. In upper part of capacity make opening under the union with the crane, for water supply. In front of the crane install the replaceable filter of water. In face of upper part make several openings for hit of air in capacity.
5. Make the basis for capacity in such a way that it would be convenient to regulate giving and water flow. Make the basis of four brick columns and lay on them the sheet of metal with opening less than diameter of capacity. The space between columns has to be enough for manipulations with cranes of production of water.
6. Collect all design. Establish on the basis. In vinyl hose, depending on quantity and plant variety, make openings and insert into them water outlets. Close edges of hoses rubber, plastic, or wooden stubs.
7. That hoses did not lie on the earth and water outlets did not get littered, along beds establish vertical racks and fasten hoses wire to them. Height of arrangement depends on plant species.
8. Connect water feed hose. Open valve and fill capacity with water. Open in turn cranes for production of water. Check that there would be no leakages. If there are leakages, then on problem places put collars or seal with silicone.
9. If giving in the system of water happens by means of the electric pump, then put the timer. Count time of filling of system and adjust the timer. Then the system works without participation of the person.