Paths on the site can be paved in different ways, for example or having filled in with the bought tile made independently concrete in figured timbering. All options have the advantages and shortcomings.
It is required to you
- - crushed stone
- - gravel
- - bank sand
- - cement
- - tes or folding timbering
- - casting molds
- - capacity for solution mixing
Instruction
1. The purchased tile is established quickly, has different ornament and color, but costs expensive. The tile made independently turns out very strong, the form and the size can be done at own discretion, at addition of color various colors turn out, but process of production demands time. Filling of paths by means of concrete is also demanded option. The timbering is established figured, the form becomes at own discretion. It is possible to use one of options for production of paths.
2. For independent production of tile it will be required to make casting molds. Any special expensive tools to have there is no need. Solution mixes up in any convenient capacity by means of spade. When filling in forms it is rather just good to stamp it.
3. The ratio of solution has to consist of 1 part of cement, 3 parts of sand and 3 parts of small crushed stone. As it was already written above, it is possible to add color for concrete. In two days after filling the tile cleans up from form, and the form is filled with new solution.
4. By such method it is possible to make enough inexpensive tile for paths. It is necessary to establish it on the prepared surface.
5. For surface preparation all turf cleans up. The installation site sleeps off gravel and sand and is carefully rammed. From above it is necessary to fill thick layer of sand and on it to establish tile. The purchased tile is established by the same method.
6. For production of monolithic tile the timbering from Teso or metal folding is established. Solution is made in the way stated above. After solution hardening, in 2 weeks the timbering is removed.