The tile is especially distinguished from different types of roofing materials for roofs of owner-occupied dwellings – long since it is considered one of the most esthetic and strong coverings and is suitable for any house with small amount of floors. The tile happens different types and if you have decided to use it as roofing material, you have to know how it is correct to stack it.
It is required to you
- - tile;
- - brackets/nails / klyammery;
- - lime mortar;
- - oil paint.
Instruction
1. Because of the big weight of tile the roof has to be equipped with the strengthened rafters. Stack tile with an overlap or in double overlap, depending on its type. On roof latten it is worth strengthening tile by means of brackets, nails or klyammer who hold tile on roof.
2. Some types of tile well hold the account of curb weight the friend on the friend. If you fix tile klyammer, insert them into tile openings, and beat hooks of klyammer from the attic to furring from the inside. To close number of tops of klyammer, lay new number of tile which edge will close upper part of your laid row.
3. Surely fix those sites of tile which are on eaves, the fad and edges of roof by wire or special metal brackets. If the roof of your house has big corner of bias, tie up tile through one row or fix by wire each tile.
4. Stack tile tiles on roof from below up, since eaves of roof and finishing with the fad. If you put grooved tile, stack it ranks from right to left and if channeled – on the contrary, from left to right. If flat tile, stack it in any order – such tile can be put both on the right, and at the left.
5. Stack plates at the same time in three-four rows, laying for a start two whole tiles from initial pediment, and in the second row establish tiles with an overlap on the first row, establishing at first half of tile, and then the whole tile. In the third row establish the whole tile. In the fourth row establish tile half, and then I kiss one.
6. Move on ranks, observing the described sequence until ranks of tile capture all height of roof from eaves to the fad. It is the best of all to spread tile symmetrically – by identical quantity of rows on each slope of roof at the same time to balance load of house walls.
7. From the attic you can strengthen connections of tile lime mortar or tow subsequently, and outside paint tile oil paint.