Fans of bathing relax, of course, know that it to boors is the Turkish bath. From the Russian steam room and the Finnish sauna it is distinguished by availability of wet vapor and low temperature of soaring. Wet vapor cleans organism and promotes the strengthened lymphatic drainage that leads to detoxication of all organism. In general, the Turkish bath is the whole complex of the procedures including soft warming up, massage and peeling soapsuds.
Instruction
1. Choose the site for construction of the Turkish bath near the house. To boors has to have the sufficient size to contain steam room, the room for keyf – rest, the technology room for the steam generator (not further 15 m from steam room), the small pool and shower cabins.
2. Make the project of the Turkish bath, considering necessary waterproofing, supply of the sewerage and water supply and also the device of dome-shaped ceiling. The bar of bath is usually cleared by 2.5 m. Think over arrangement of plank beds, benches, massage table, the pool, the fountain flavoring devices. Carefully consider design of hammam. In it you will reduce stress, to enjoy rest and luxury.
3. Choose material for construction of hammam. Experts advise to use glued bar as the most technological material for construction of various baths. It has low heat conductivity and resistance to the increased humidity. However, boors can build and brick or foam concrete. The main thing that the internal room was trimmed by stone or material "under stone". Traditional to boors decorate with mosaic and marble to keep humidity and temperature.
4. Establish abutments of hammam and dome over them. Further build plank beds and sitting, massage table. All this motionless, main designs. Therefore they should be done first of all. Equip their heating by the principle "heat-insulated floor". Install electrical equipment, the sewerage, connect water supply system.
5. Connect the steam generator, install cranes, shower, sewer drainings. Make room waterproofing. Finish internal part of hammam according to the project.