How to make well cover

How to make well cover

The well allows to solve completely problem with availability of potable water in areas where there is no central water supply. That water always was clear and foreign objects did not get to it, it is necessary to make reliable and convenient cover.

It is required to you

  • - bars;
  • - tes;
  • - hacksaw;
  • - tape measure;
  • - stainless steel;
  • - hinges;
  • - rubber belt;
  • - roofing material.

Instruction

1. For production of well cover you will need tes with grooves, nails, 6 bars of 20х30 cm, tape measure for measurement of the sizes of cover. If in your region temperature falls lower than 20 degrees in the winter, then the cover has to be double that there was opportunity to warm well in order to avoid water freezing.

2. Measure length and width created. Make furring of bars according to the sizes. Sheathe furring dry yew with grooves. From bottom side of cover on the center beat the strengthening bar.

3. By the same method make top cover. Lower will be located below created, top – from above. In cold season between the first and second cover stack pillow by the size created, filled by hay, straw or sawdust.

4. That covers were convenient to use, fix iron hinges. Instead of them you can use dense rubber belt which needs to be beaten one party on created, another – on cover. On both covers beat wooden or iron handles.

5. The lower and upper part created also has to have furring at the edges on which you will put covers. Make furring of corner or bar.

6. Except covers the well has to have roof which you can make at discretion. The simplest is double-pitch roof. For its production establish racks, make small furring, sheathe side pediments and cover well with any roofing materials.

7. If your well is made of round reinforced concrete rings, you can make round wooden cover or cut out circle from stainless steel, strengthen it bars. Ready reinforced concrete covers which are on sale together with rings very heavy and are not suitable for wells. They are used only for the designs which are not demanding constant opening, for example, for sewerages.

Author: «MirrorInfo» Dream Team


Print