Condensate is formed practically in all systems in the car. However not all from them can continue effectively and safely work in such state therefore if you have noticed that the machine began to work worse, organize draining of condensate from the most important automobile systems.
It is required to you
- - rags;
- - 5-10 ml medical syringe without needle;
- - thin flexible silicone tube;
- - collar;
- - capacity for condensate draining.
Instruction
1. Start the car and properly warm up the engine. Surely disconnect it before beginning the procedure of draining of condensate.
2. Enclose rags because condensate rather strongly eats under reducer and has persistent unpleasant smell.
3. Find in the lower part of reducer drainage threaded plug or the faucet via which it is necessary to merge the collecting condensate of oily fractions of gas and moisture. Turn off this stopper or disconnect feed hose of low pressure from reducer on the engine.
4. Take the ordinary medical syringe of 5-10 milliliters and put on it flexible silicone tube instead of needle. Enter this tube into opening so that its end has appeared at the bottom of reducer, and involve the syringe liquid which has accumulated there. Merge it in beforehand prepared capacity.
5. Repeat the procedure necessary number of times until in reducer liquid reaches a limit. The amount of the merged condensate normal should not exceed 30 ml. If it is more of it, pay attention to quality of gas which you buy and also on condition of feed system of gas in the engine.
6. Twirl drainage threaded plug or install feed hose of low pressure from reducer on the engine into place and fix it by collar.