How to mount ventilation

How to mount ventilation

All want that air in the apartment always remained clean and fresh? But how to achieve it if planning of the apartment not really successful, and the kitchen with all its aromas and soot is in close proximity to the bedroom or the room? The decision is! To minimize distribution of kitchen smells on the apartment, it is necessary to mount ventilation only correctly.

It is required to you

  • - level;
  • - silicone sealant;
  • - pencil;
  • - drill;
  • - drill of suitable diameter;
  • - screw-driver;
  • - electrical wire;
  • - fixtures for wire;
  • - socket;
  • - mounting screws.

Instruction

1. Remember that the ventilating box needs to be connected to electricity, and for this purpose it is necessary to lay wire and to install the socket. You remember safety: during work it is necessary to disconnect electricity in all apartment.

2. Before starting directly installation of the device, make sure that the fan switch is in situation "is switched off" to avoid its inclusion in the moment of connection to electricity.

3. Connect output sleeve of the device to vent system of your apartment (where there is ventilating grate). Take care of tightness of connection to avoid leak of the ventilated air, for this purpose process connection by silicone sealant.

4. Define the place of fastening of ventilating box. For this purpose by means of level note horizontal on wall, apply extract and note on wall pencil the place of fastening.

5. In noted mints drill openings, record fixing level on wall. After that twirl assembly screws. Surely check reliability of fastening of the device before use.

6. Now attentively study the instruction of the producer and install the filter and the fan according to the requirements specified there.

7. Completion phase of mounting: connect electric cable and record it on wall by means of special fixtures. Do not forget to read attentively the instruction before connection of wires of illumination and the fan.

8. Check whether illumination and the fan correctly work. For this purpose connect power supply and include extract. If all of you have made correctly, the extract is prepared for use.

Author: «MirrorInfo» Dream Team


Print