Modern washing machines are rather reliable equipment. But also to them periodically there are troubles. What to do if your machine, having finished washing cycle, does not wish to open and "give" the washed linen? Of course, it is necessary to call the service center and to call the master. But how to be if say to you that the master will be able to accept your call only the day after tomorrow? It is possible to try to open machine door independently.
It is required to you
- - sharp metal object;
- - cross-shaped screw-driver;
- - wrench.
Instruction
1. Disconnect the machine from the power supply network.
2. Drain water from mashinyprigotovta basin or other capacity for water. Remove the lower decorative panel. Slowly turn off the filter which is under the panel. Do not turn off the filter completely. Just achieve that water has begun to flow. Drain water in basin. After that completely turn off and take out the filter.
3. Establish the reason neispravnostisushchestvut several basic reasons of this type of breakages - breakage of the handle of the hatch, shutdown of power supply or blocking of the lock of the machine. Blocking of the lock, as a rule, results hit of clothes in latching mechanism of door of the washing machine. It is easy to establish hit of fragments of clothes visually.
4. Take are sharp metal subject and try to press it the allocated site in the place of fastening of the handle of the hatch. If it was not succeeded to open the car thus, it is necessary to remove top cover of the machine.
5. Remove top cover you mashinyotkrutit screws which fix top cover of the machine to its casing. Raise back part of cover one hand. The second hand push front part of cover towards back wall of the machine. Make sure that the cover is unhooked and accurately remove it.
6. Reject the machine back so that its tank was removed from front wall. Push hand to blocking and grope the fixing uvula. Take uvula aside and open machine door. If to press uvula and it is not possible to open the car, it is necessary to dismantle the blocking device.
7. Pick up the screw-driver and unbend the device of blocking of the hatch from within the washing machine. Open door and turn off the self-tapping screws fixing the device on the machine body. Dismantle the lock.
8. Exempt tank of the washing machine from clothes and start repair and replacement of the damaged parts.