It is possible to get access to the mode of programming of the intercom by means of set of the password on the keyboard. After that the gathered code has opportunity to open door with the intercom without any chip. Service codes of intercoms are established by the producer and are identical to all models. Fitters, as a rule, do not change these codes. If the service code nevertheless is replaced, address for its opening the fitter.
Instruction
1. For opening of the "Barrier" intercom models 2 and 2M enter the code of opening 1013. By the way, it cannot be changed even by customer service. Besides, all models open two small magnets if to carry out them on site for applying of the chip. Exception - "Barrier-4" intercom. It has no service code of opening, and quantity of magnets in the chip – 3.
2. For opening of the VIZIT intercom try standard codes of *#4230 or 12#345. Latest models can have the code of *#423 or 67#890. If it does not help, enter the service menu by means of the code #999, wait for two short sound signals and enter master code 1234. If the intercom was already opened, the sound signal will be single. At the incorrect master code the sound will be two-tone. Besides, the master codes can be look 6767, 3535, 9999, 0000, 12345, 11639. Then for opening of door enter the two, after pause grid and after one more pause 3535.
3. For opening of the CYFRAL intercom if in the stairwell there are apartments with number, multiple 100, press attendance button, and then number of the apartment, multiple 100. After that once again press the button of vykhov and enter master code 2323, 7272 or 7273. For modifications of CYFRAL-M try to press key of call and to enter 41 or 1410. In rare instances the door opens at input of combination 07054.
4. For opening of the CCD-2094M intercom gather combination 0000 and press attendance button. On the display the inscription COD has to be highlighted. After that enter master code 123456, 456999 or 123400 and press apartment call key. If everything is made correctly, in 5 seconds on the screen to appear inscription F0 and you will need only to enter the code of opening 601.
5. For opening of the CCD-2094.1M intercom press attendance button and enter 0000. At the same time either the door will at once open, or there will be entrance to the service menu. In the second case on the display the inscription ON will light up and you will need only to press digit 2. In case the inscription OFF lights up, so access codes are changed.
6. To open door with the ELTIS intercom press attendance button, then enter digit 100, then again attendance button and then – the master code 7273 or 2323. If this option has not turned out, try to open it similar to CYFRAL and CCD intercoms.
7. Open the METAKOM intercom by means of the following method: press attendance button, then number of the first apartment in the stairwell and again call key. After emergence on the screen of the inscription COD enter combination 5702. Some models can be opened, having gathered 65535+ key of call +1234+ key of call + 8 or 1234 + call key +6+ key of call +4568.
8. Open the M/T METAKOM MK-20 model by means of combination: call key +27+ key of call +5702. Also the combination can approach: call key +1+ key of call +4526. For entrance to the mode of programming bring to the reader the chip without insertion.
9. Open the RAINMANN 2000 intercom pressing of the button with the pictogram of key with the subsequent introduction of code 987654. After double peep enter combination 123456. On the screen letter P has to be highlighted. Now for opening of door press the eight.
10. For opening of door with the intercom of the DOMOGUARD brand press button C and after sound signal quickly enter service code 669900+ attendance button + number of the apartment, following after the last in the stairwell. After emergence on inscription F screen---enter code 080.
11. For opening of the T-GUARD intercom press call key, then enter five zero and again press call key twice. Important all pressing, especially two last to make very quickly.
12. Opening the FACTORIAL intercom, you enter combination from six zero or 123456. These are standard service codes, but they are in most cases changed at installation. If this is so, press and you hold button 5 before emergence of the service message on the display. Then enter 180180+ attendance button +4+ attendance button.
13. The single-user BLINK audiointercom has no service codes. Take the "Krone" battery or "Corundum" or any other battery conforming to the European standard 6F22. Under the lower panel find the false bolts which are precisely corresponding to the battery connector, and apply it to these bolts.