Aquarium in the apartment - not just capacity for keeping of beautiful small fishes and exotic plants. It performs also decorative function and is designed to serve as decoration of the dwelling. Except internal furniture and with taste of the picked-up school of small fishes, for aquarium also elegant background matters. It is not always convenient to use internal volume background as it, as a rule, is more expensive and is more whimsical in service. Therefore we will stop the choice at background which fastens to aquarium outside.
It is required to you
- - background of Juwel Poster L
- - JBL Fixol glue;
- - sponge;
- - means for purification of glasses;
- - office adhesive tape.
Instruction
1. Just refuse temptation to take background on corners and edges normal adhesive tape. At such way of fastening air and water which is flowing down on aquarium walls from under cover can get between background and back wall of aquarium. Visible gray spots, are formed where water has got, the background temporarily sticks to glass.
2. Do not use also for background sticker make-shifts, like glycerin, soap or sugar syrup. Over time such pokleyka leads to flaking of background in badly missed the mark places.
3. As background for typical and rather widespread aquarium of 80 liters and 600х500 mm back glass in size choose, for example, background of Juwel Poster L.
4. Put aquarium on front surface and carefully purify back glass from outer end. For this purpose use soft sponge and household means for purification of glasses. If necessary to remove the firm particles which have stuck to glass, use, for example, unnecessary toothbrush. Remove with dust and stains that glass after processing became the cleanest has flown down.
5. After drying of glass apply on it JBL Fixol glue. The structure should be put on all surface of glass, creating the drawing in the form of "snake". Consider that the amount of glue in set is calculated, as a rule, on the area about 2 sq.m. Cover more carefully with glue of edge of back surface of glass as they can lag behind glass.
6. By means of the special palette which is included in the glue package distribute glue structure evenly on all surface area. Try that movements at the same time were smooth.
7. Take the background which is previously cut by the glass size, accurately apply it to the top edge and level on all surface. Act accurately, but you remember that if first the background has laid down irregularly, it can be torn off easily from glass and to put anew.
8. By means of the palette smooth movements distil the air which has remained after applying of background. Make movements from the center to edges of surface, without allowing formation of air bubbles. At the edges delete surplus of glue with sponge. Pay special attention to corners and edges of background where glue has property to lag behind surface. For reliability attach corners to glass office adhesive tape. Carefully remove adhesive tape after glue drying. Also clean residues of glue from aquarium walls.