The window or door glass originally looks if to decorate it with self-adhesive film. For this purpose it is possible to use special film with imitation of stained-glass window or ready pictures on sticky basis. Following simple rules, you quickly decorate glass the hands.
It is required to you
- - self-adhesive film;
- - scissors;
- - flower spray;
- - liquid for washing of windows;
- - soft rag or rubber palette;
- - needle.
Instruction
1. Consider ambient temperature when gluing film on plain glass. On the street there have to be not less than 5 - 8 degrees of heat, otherwise self-bonding will badly be fixed on surface.
2. Prepare glass. Wash up it on both sides and not just where you are going to glue film.
3. Pour in the flower spray water from under the crane. Drip in capacity liquid soap or means for washing of ware. Mix turned out solution, but try not to shake up that there was no foam.
4. Measure glass and make preparation of the necessary sizes of self-bonding. On the paper party of film there is centimetric marking which does process of cutting elements very convenient. You can stick completely glass or start up stained-glass window narrow strip in the middle of window or door. And you can cut out different figures from monophonic film and use them for gluing.
5. Spray water from the spray on glass in that place where self-bonding will be located. The wet layer will allow to move film that correctly it to arrange on glass, without tearing off from surface.
6. Separate paper layer from film from one edge on 5 - 10 cm and bend it. If sticker small, it is possible to remove paper completely.
7. Apply self-bonding by sticky layer on glass. Carefully smooth surface with the rubber palette or soft rag. You need to expel from under applique of water droplet and air bubbles. Smooth film with "fir-tree" from the center to edges.
8. Holding with one hand film, the second hand slowly extend paper. Separate some more centimeters of sticky layer and level it on glass. If on self-bonding the fold was formed, separate the next edge from surface and anew smooth.
9. Attentively examine the work. The air bubble which has accidentally got under film can be punctured with needle and to press this place rag.