The arch is curvilinear overlapping of deaf or through wall opening, flight between two abutments or columns. It is symmetric to rather vertical axis. Such decision is not only architectural, but also design reception recently. In the form of arches both door openings, and niches in walls become. Therefore at repair special attention needs to be paid on obkleivaniye of so original architectural concept wall-paper.
- - dense paste;
- - wall-paper;
- - brush;
- - scissors;
- - ruler;
- - pencil.
1. Prepare paste. It has to be more dense, than at normal gluing of wall-paper on walls. It becomes in order that drops were not formed and there was no too fast drying. At such paste wall-paper already on wall can be moved, for the best coincidence of the drawing and adjunction of seams.
2. After you have pasted the last cloth of wall-paper before arch, glue the following so that it has closed part of arch aperture. Having pasted, cut off part of this strip of wall-paper, having left the edge acting on 25 mm over aperture.
3. Make an incision this acting strip until the end of aperture at an interval of 25 millimeters, bend to slope and press brush.
4. Paste wall-paper on inside of arch niche. Before cutting necessary strip, impose panel on arch dry and move until the drawing of wall-paper coincides with already pasted around arch.
5. After that pencil note the line of arch with allowances for bend in 25 mm and paste ready part in aperture. Allowances are necessary that there were no free spaces between seams. At sticker end-to-end, but not with an overlap, even the small shift of cloth of wall-paper can lead to the fact that the site of wall will remain bared.
6. Measure by ruler arch depth, cut out strip of necessary width from wall-paper and paste it on slope.