If there is no door in your apartment old, and money for installation of new, be not upset. You can update doors and give them more elegant look, having pasted over them with film self-bonding. To make it very simply, and the result will please you.
It is required to you
- film, rag, roller, hair dryer
Instruction
1. Remove door handles and remove old film if it, of course, is. Accurately to zashkurta door cloths. Carefully to roughness proshpaklyuyta, differently all defects will appear through film.
2. Remove sawdust by means of the vacuum cleaner, wipe door. It can be done both napkin from microfiber, and simple damp cotton rag.
3. Unwind roll of self-adhesive film to door top, apply it to surface, carrying out alignment on the top corner of door. Make the marks corresponding to door dimensions, leaving small allowance on width and height.
4. Put film on floor and cut according to the made marking. Now it is possible to start gluing. Unbend paper which closes sticky surface on 1 cm, down from roll top. Paste roll to door top, monitoring uniform distribution of film on door cloth. Accurately level film on door. Carry out correction if it is required.
5. Remove paper layer from self-bonding. Iron film on all surface, watching that there were no distortions. The direction of ironing – from the center in the parties. Begin with easy ironing, and after gluing of all leaf start stronger influence. It is possible to use dry rag or the construction roller.
6. There is also different way – to paste film, gradually pulling out paper from under film and at once ironing surface by means of rag. Then you are insured from emergence of bubbles. If it is not pleasant to you how the film lays down, then you can use the hair dryer. Accurately warm up the problem site before ironing it.
7. Cut off allowances by means of sharp knife, sliding its edge on door face. If it is necessary, iron film on perimeter. It can be done any round firm subject (for example, handles of scissors), carrying out by it at the edges of film.
8. Start assembling of handles, trying not to damage film. After that scavenge and admire new door.