The choice of tile to the bathroom or on kitchen – process very important, one may say, creative. However it is worth to remember also about color of finish of seams. If it is wrong to pick up it, even the most magnificent tile will look "so-so". At right choice of color she will emphasize all advantages of finishing.
Instruction
1. Surely take tile sample in shop where you will buy finish for it. If it is going to use several types, then for each site of wall the color of structure can be required. Choose finish in that shop where there is the maximum choice of shades.
2. Define the lightest and the most dark tone of the drawing of tile. Compare both chosen colors with color of plumbing and furniture which will stand indoors. If the room in which were going to put tile of the small size and it there is a wish to increase visually – color of finish has to correspond to the lightest of all chosen shades. If it is necessary to achieve effect of reduction of space, choose the most dark.
3. If the tile is monophonic, use finish of the same color as tile if you want to draw more attention to furniture. On the contrary, if you want to place emphasis on tile, select finish opposite according to color. At the same time both the tile, and finish to it have to be in one color gamma.
4. Ask the seller to apply a little finish on tile sample. Look as far as they are in harmony with each other. Wait until the finish on sample dries, only after that it is possible to make purchase – in the course of drying color can change.
5. If the tile makes the difficult mosaic drawing, and there is no desire to draw attention to seams, choose gray finish as one tone lighter than the general background. If necessary to hide defects or roughnesses of covering, use the weight completely coincident on color with tile.