In the course of cooking settle fat droplets on walls and ceiling, moisture from the liquid boiling on plate spoils coverings, and the unpleasant smell from the burned products extends on all house. After installation of kitchen extract these problems just disappear.
There are many options of kitchen extracts of various design and principle of work, with additional functions and without them. The only thing that unites them - it is availability in the fan device. Not only power, but also height of noise which will publish during the work extract depends on its sizes and rotational speed.
The size matters
The main rule which needs to be observed when choosing extract is compliance of its sizes. That variant of the device which sizes correspond to the sizes of the cooking panel will be optimal. If the so-called exhaust umbrella of the device is less, than the plate, then the device just will not cope with air flow which arrives from its surface. Also diameter of exhaust pipe and the air cleaner is important in this plan.
Installation of large-size extract requires very many place. And the more the exhaust umbrella, the above it has to be located. According to the established standards, the extract is established at the height from 70 to 85 cm over kitchen stove, depending on its power and dimensions.
Types of kitchen extracts
If to mean the principle of operation of similar devices, then they can be separated into two main types – flowing type and so-called recirculation. Flowing extracts are connected to air shafts. In multifamily houses for these purposes it is better to lay separate branch of air duct, otherwise it is possible to block air flow in the mine from other apartments. To perform such works it is qualitative the hands very difficult and better to ask for the help the professional. In extracts of the second type, recirculating, air undergoes cleaning by means of several filters and comes back to the room. They are not so effective as they flowing, cope with unpleasant smells much worse, and filters need to be changed through some time. On design and exterior the kitchen extracts are divided into island and built in. The built-in extract is almost imperceptible, it is established in cabinet or fastens to its lower plane, and in sight there is only its working surface. Such design of the device allows not to change interior of kitchen and to establish it even after final arrangement of the room. Island kitchen extracts are separate subject, independent part of interior. They look as quite large unit fixed on ceiling, and its exhaust umbrella is located strictly on the center of the cooking panel of kitchen stove. Such models perfectly look in those kitchens in which the plate is located not at wall, and in the center of the room.