Any owner of the country site knows how it is heavy to process the soil for landings. Especially for simplification of work on personal plot means of small-scale mechanization have been developed and created. By means of the motor-block it is possible to plow and cultivate the soil, to cut bed and also to dig out potatoes and other root crops.
It is required to you
- - motor-block,
- - bars,
- - lock-nuts,
- - wrench.
Instruction
1. Remove shipping wheels and install grousers on the motor-block. Put on additional cargoes if they are included in the package. Establish plow.
2. Put the motor-block on in advance prepared bars. Height of bars has to be not less than 120 mm.
3. Adjust, by means of adjusting bolt, basic "heel" of plow. It has to be strictly soil parallel surface. Record bolt by means of lock-nuts. It needs to be made in order that in the course of plowed land the screw has not weakened and adjustment was not broken.
4. Establish motor-block wheel on the center of adjustment screw. This situation is considered the most convenient for plowed land. Visually define the central axis of the parcel intended under plowed land. Put the motor-block for the beginning of this axis.
5. Cut the first furrow. Try that the line of furrow was equal.
6. Deploy the motor-block on the edge of the site. Install the motor-block so that its right wheel has appeared opposite to the first furrow.
7. Try to conduct the motor-block on edge of crest of already cut furrow. Such method of plowed land is called "in slope". Thanks to it you receive carefully and accurately plowed site since the earth rejected by plow ploughshare will form equal furrows and crests. Besides at this method of plowed land the optimum depth of plowing is provided and load of the engine decreases.
8. Conduct the motor-block exactly, without pushing it. You do not press on wheel. You hold wheel so that the motor-block was under small, approximately in 10 degrees, bias to plow. It will help to save fuel and will facilitate work to the device. You watch closely that the engine of the machine did not overheat. If you have felt power loss, kill the engine and let's it cool down within 30-40 min. Only after that it is possible to continue work.