How to process curtain from organza

How to process curtain from organza

Organza is quite rigid, but at the same time fine and transparent fabric which is made by twisting of two fibers of viscose, polyester or silk. Organza is both brilliant, and opaque, it is decorated with embroidery, printing drawings or etching. Fabric very much is suitable for tailoring of curtains as perfectly passes light.

It is required to you

  • - organza;
  • - slanting inlay in tone of fabric;
  • - threads;
  • - needle;
  • - safety pins;
  • - curtain tape;
  • - sewing machine.

Instruction

1. For production of curtain from organza you will need fabric 1.5 - 2 times more than width of eaves. Organza – fabric quite thin and slippery therefore it is necessary to process it very carefully not to damage. Otherwise all work can come to nothing.

2. Spread out fabric on equal and quite big surface (on floor or table) and accurately cut off edges of fabric. Sheathe side cuts slanting inlay (it is sold in drapery). Pin it safety pins and sweep away manually. Stitch inlay on the sewing machine. In order that the line was equal, monitor the provision of claw in relation to edge of inlay. For sewing use sharp needle No. 80 and thin threads in tone of inlay.

3. If you could not get slanting inlay, then turn in cut two times on width of 0.7-1 cm, sweep away and stitch on the machine. Also the edge can be processed narrow overlozhny line.

4. Measure distance from eaves to the desirable length of curtain. Measure this length from bottom edge of organza. Unbend the upper edge of fabric on inner side. Safety pins pin curtain tape at distance of three centimeters from edge.

5. For curtains choose dense and transparent corrugated tape from organza. This narrow tape stretches by means of two "strings", forming soft folds. Besides, curtain with such tape it is very convenient to fix to curtain by means of small plastic hooks. And also the curtain tape helps to strengthen the upper edge of curtain, keeps form and does not allow edge to sag.

6. Stitch tape on the sewing machine close to edge from two parties. Bend edges of tape also to zastrochita. Pull together up to the size to the equal width of eaves. Tie threads, cut off the ends.

7. Iron curtain from organza. Consider that the iron should not be strongly hot. Now it is possible to decorate window.

Author: «MirrorInfo» Dream Team


Print