How to process fungus on wall

How to process fungus on wall

It seems you have made repair only recently and have changed windows, but here ill luck - on walls spots of dark color appear and intolerably smells of dampness. The dispute of mushrooms is the most comfortable condition for life and development the increased humidity. As to process fungus on wall to eliminate it completely, without giving the chance to appear again?

It is required to you

  • - palette;
  • - antiseptic and antifungal means;
  • - antifungal primer;
  • - brush;
  • - roller.

Instruction

1. First of all it is necessary to establish the reason of emergence of fungus on walls. More often this problem affects shabby housing and rooms with the increased humidity. Therefore check and restore normal work of ventilation, blow batteries (if it is necessary – change). Check serviceability of plumbing, water should not drip and leak, it can serve as the mold growth reason on walls.

2. As much as possible clean walls from plaster in places of formation of fungus. For this purpose it is necessary to moisten wall with warm water by means of the roller and to wait so far plaster will soften, thus, you without effort clean off it from surface of walls. If necessary repeat the procedure several times.

3. The fungus has property to strike not only surface, but also concrete structures. Smooth out small layer of concrete surface, get rid of loose coating and air locks by percussion. Then carefully dry walls in the natural way, the construction hair dryer or blow torch (be careful during the work with these devices).

4. Antiseptics is the main and main means in fight against all types of fungi and mold. These chemical compositions possess antifungal and antimicrobial actions. Water-soluble antiseptics as which thinner turpentine or Whyte alcohol is used are widely used. In shops and large number of similar means is presented at the markets of construction materials.

5. Part the bought antifungal means according to the instruction and apply structure on all surface of walls by means of brush or the roller. Pay special attention to the places struck with fungus. Process walls two times. Then ground walls antiseptic medicine, it is necessary for good adhesion of wall and plaster. After drying it is possible to start finishing work safely.

Author: «MirrorInfo» Dream Team


Print