Quite often when using glue there is situation when it gets on hands. And the accurate people using during the work of glove face this problem even. How with the smallest efforts to remove glue from hands?
It is required to you
- - rags;
- - soap;
- - baking soda;
- - ammonia solution solution;
- - rigid brush;
- - pumice;
- - greasy cosmetic cream;
- - solution of dimeskid;
- - organic solvents;
- - special means for removal of glue.
Instruction
1. Wash the polluted sites of skin with flowing water, and then wipe rags. Water will wash away top layer of glue, and fabric will erase its remains. This method is relevant only in case you were soiled some minutes ago, and glue has not managed to dry up yet.
2. At hit on hands of polyvinyl acetate (PVA) or water glass cement (it is also called office, office, "liquid glass"), wash up them warm water with soap. Rub the polluted places rigid brush. If this way to completely remove pollution it was not possible, then you otmochit hands in soap bath with addition of ammonia solution (2 tablespoons on water liter) or baking soda (1 tsp on water liter), and then again use brush.
3. In case on hands epoxy glue has got, you will be helped by organic solvents (acetone, gasoline, white spirit, etc.). Moisten with them small piece of fabric and rub skin before full removal of the dried-up spots. Then carefully wash hands with water with soap.
4. If you were soiled with joiner's glue, the same as in case with PVA, at first otmochit hands in soap bath, and then scratch out pollution by pumice or abrasive paper.
5. In case of hit on skin of superglue or all-purpose adhesive apply on it thick layer of greasy cream or any oil. In 30 minutes when the dried-up glue film is softened, wash up hands water and rub the polluted places pumice. Instead of oil you can use solution of dimeksid, it also dissolves the cyanoacrylate which is part of such glues. Apply solution on vatu and erase it the stiffened pollution.
6. Use special means for removal of glue, for example, by AntiKley from the Henkel company. Apply with AntiKlya thin layer on the soiled hands and wait 1-2 minutes. Remove with dry rags from skin the remains of the gluing structure together with means for its dissolution.