Many owners of owner-occupied dwellings and dachas often have problem connected with water treatment in the well. The fact is that the well can constantly will get littered with silt and various garbage that as a result leads to abatement of the water level. Water in the well always has to be ideally clear. Your health and health of your family fully depends on it. It is necessary to watch purity of the well.
It is required to you
- - bailer;
- - pipe with a diameter of 50 mm and 60 cm long;
- - metal sphere with a diameter of 40 mm;
- - washer;
- - hinge;
- - grid;
- - kapron cord;
- - metal rope.
Instruction
1. Now there are very many tools by means of which cleaning of wells is carried out. However everyone is not able to afford pump, injector gun or the special vehicle. If not to do cleaning, then the speed of water inflow will gradually decrease. As a result, it will lead to complete cessation of water supply. The well ceases to exist. For this reason the well needs to be held constantly in working order.
2. At the moment there are several ways which allow to make independent modern cleaning of the well of the collecting silt. It should be noted that the well will be quicker silted if it is not enough to use. Than more often and more from the well it is pumped out waters, that the well is more efficient and water is purer.
3. It is possible to clean the well by means of bailer. It is quite difficult to clean the well in this way, however it is very reliable. By means of bailer you can clean even that well which completely does not work. When cleaning, not only silt, but also coarse sand, and small stones will be extracted. At bailer very simple device. It can be made independently. The sizes need to be made according to the inside diameter of the well. Outer diameter of bailer has to be well no more than an internal pipe diameter.
4. To make bailer of standard dimension take pipe which inside diameter about 50 millimeters, and length – 60 centimeters. Make metal sphere with a diameter of 40 millimeters. It is possible to use washer which bottom side flat. Tightly weld the hinge on pipe. From above on pipe welding attach grid that the sphere could not take off from pipe. Attach arch to which you will fix kapron cord or thin metal rope. Now the bailer can be used for water treatment from the well.