Laminate represents modern floor covering when which laying is not required big financial investments and experience in construction and repair of rooms.
It is required to you
- - level;
- - laminatny board;
- - saw or fret saw;
- - spreader wedges;
- - tape measure;
- - hammer;
- - bracket for padding of board;
- - pencil and ruler.
Instruction
1. At the first stage it is necessary to prepare the acquired laminatny boards. It is necessary for the reason that material has to "get used" to weather conditions of the room: humidity, temperature condition. Optimal conditions for board are 18-20 degrees With at humidity of 70%. Otherwise there is laminate rassykhaniye.
2. The second stage is preparation of floor. Previously check surface by means of level for flatness to exclude sharp differences. Grind wooden or parquet floor, concrete – cover with the self-leveled tie, – remove linoleum and put tie. It is not recommended to stack laminate over carpets.
3. Further it is necessary to provide surface waterproofing thanks to what material long time will keep the characteristics. Function of waterproofing is performed by polyethylene paroizolyatsionny film which is attached on office adhesive tape. The following layer is the substrate from frothed polyethylene. Just before laying of laminatny board clean and dry floor surface.
4. It is necessary to begin laminate laying perpendicular to wall on which there is window or windows. Recede from wall of at least 10 cm, using spreader wedges. Further put one board to another at an angle in 30 degrees that the lock has turned out on itself then latch it. Similarly the first row width in two boards is built. The following row gives all the best in the same way, but with the shift of edge seams on 30-40 cm that the chess order has turned out.