Beginning to equip own site, first of all most of owners build fences. The fencing around the site not only accurately designates its borders, but also serves as obstacle in way of undesirable visitors.
The most practical and convenient for construction many recognize fence from professional flooring. It differs in low cost and simplicity of mounting, and even the unexperienced master can make installation. It is possible to perform on the basis of the instruction made by experienced builders all necessary works independently.
Galvanized professional sheets are capable to serve considerable term. Using this material, it is possible to arrange fence in any desirable color gamma. The fencing turns out strong and well protects from foreign views.
At installation of fence from professional flooring first of all the line surrounding the site on which the basis for construction will be created is defined. Then make mounting of rod posts and cross racks on which sheets of material fasten. Each of stages of mounting can be considered in detail.
1. Performance of marking. The location of gate and gate is defined precisely, places where columns will be established are outlined. The distance between them is maintained no more than three meters.
2. At installation of rod posts from tree they are recommended to be processed the impregnations protecting from rotting. If columns are chosen from metal, the top should be made or closed caps to protect from water ingress. Level of deepening of support depends on on what height it is going to erect fence. Than it is higher, that drive support more deeply.
3. After excavation of holes for columns on bottom it is necessary to fill not really fine gravel, 20 cm thick. On it by means of plumb establish column then fill in cement in hole. In certain cases installation of continuous footing can be required. It is necessary to leave the holes which are filled in with solution for hardening is about three days. Then it is possible to continue work.
4. After final hardening of cement we begin installation log. For mounting the cross pro-thinned-out elements from steel are used. The number log in each of sections depends on what height of fence is planned. With height up to two meters it is enough two log if height more – is required installation log in the upper and lower part and also in the middle. Installation is carried out at distance of 4 cm from the upper and bottom edge. It is the most reliable to strengthen them it is possible by means of electric welding.
5. Special self-tapping screws on metal are used to fastening of professional flooring on logs. Sheets of material are joined with an overlap.
The fence which has turned out as a result will be able to serve long enough and will not demand special labor-consuming leaving. For these reasons it is rather popular among owners of private territories.