Very often the faulty draining hose becomes cause of infringement of operation of the washing machine. In this case it will need to be removed and replaced. How to make it without invitation of the master repairman?
Instruction
1. In the majority of the washing machines released by Electrolux, Zanussi, Siemens and Bosch, access to draining hose is provided through front wall. To disassemble the machine, perform the following operations: remove collar and accurately disconnect hatch cup from the front panel, after that take the doser.
2. Further disconnect the decorative panel in the upper socle part.
3. Merge residues of the accumulated water through the available pump strainer, in advance having enclosed under it any floorcloth.
4. Unscrew attachment screws of front wall of the washing machine to its body. One of them is located in upper part, and two are in lower.
5. Take away the lower part of wall a little on yourself, displace it down and then disconnect all wall approximately on 5-7 cm.
6. Disconnect wires from the blocking of the hatch which is on wall. Now you have got access to the most draining hose and will be able to start its replacement. Remove collar from special fastening of draining hose and disconnect hose from the central system of draining.
7. Remember places of attachment of old hose, disconnect it from case walls and then remove outside. At first densely insert new hose to the place of fastening old, then clamp it by means of collar.
8. Miss hose on walls, attach it to the body and remove outside. Connect the output end of hose to the system of the sewerage, and then check whether both ends are hermetic.